Just received my beta keymouse, this there a getting started guide.
I have the keymouse connected by usb atm, bluetooth is not stable (mouse very jerky).
I have updated the firmware.
How can I turn off the mouse for the left hand? The right hand mouse is inverted where do I change the mouse settings?
Thanks
I have the keymouse connected by usb atm, bluetooth is not stable (mouse very jerky).
I have updated the firmware.
How can I turn off the mouse for the left hand? The right hand mouse is inverted where do I change the mouse settings?
Thanks
+1 on the need for the "getting started guide". It wouldn't have to be long, but there are a lot of things that aren't immediately obvious when you take the equipment out of the box!
@Bluetooth
I also have this problem, I tested on a pc with a bt dongle and a laptop with built in bluetooth - both had the same problem but I assumed that's it's either some interference in my flat or a win 10 problem. I don't mind using it on usb so I didn't delve further, but I'd be interested to try BT out if it's fixed.
I also have this problem, I tested on a pc with a bt dongle and a laptop with built in bluetooth - both had the same problem but I assumed that's it's either some interference in my flat or a win 10 problem. I don't mind using it on usb so I didn't delve further, but I'd be interested to try BT out if it's fixed.
@Ben Sorry for the delay responding. The forum was having issues, and I did not receive a notification when you posted. I hope I was able to answer your questions by email, but if you need any further help, just let me know.
P.S. The PCB firmware developers are checking into the jumpy mouse when using Bluetooth interface. The issue seems to appear only on some computers.
P.S. The PCB firmware developers are checking into the jumpy mouse when using Bluetooth interface. The issue seems to appear only on some computers.
- Page :
- 1
There are no replies made for this post yet.
Be one of the first to reply to this post!
Be one of the first to reply to this post!